The plates should be placed in their respective spots and leveled, both crosswise and diagonally.
Each plate and corresponding rectangle should be numbered to save time on future alignment jobs.
When not being used the set is easily stored. freeing the floorspace for other uses.
LOCKING PINS MUST BE ENGAGED WHEN DRIVING A VEHICLE ON OR OFF THE WA0750, WA0770 & WA1100
TURNTABLES, BOTH THE WA0750, WA0770 AND THE WA1100, MUST BE CLEANED PERIODICALLY AS WORK AREA CONDITIONS DICTATE. THE TOP PLATES MUST BE REMOVED, THE BALLS CLEANED, THE BEARING RETAINERS CLEANED AS WELL AS BOTH THE TOP PLATES AND THE BASES.
THEN AFTER CLEANING THE PARTS ABOVE, LUBRICATE WITH A VERY FINE FILM OF MOTOR OIL ON THE MACHINED UNDERSIDE OF THE TOP PLATES AND THE TOP OF THE BASES.